The Budget Biotech

The bench beaver is always watching you

I have been toying with the idea of starting my own biotech startup in my garage, and want to determine the lowest amount of upfront investment it would take to set up a functional molecular biology lab.

OK, a little background to help the discussion. Straight out of grad school I took a job with a startup biotech developing strains for fermentation of high value small molecules. When I arrived the lab had a few tables and some basic equipment, but being that an electrical engineer did the initial purchasing it wasn’t quite ready for much biochemistry. So my first job was to outfit the lab with the necessary equipment and consumables to get things moving. I quickly realized how expensive laboratory equipment and research reagents were without the generous academic discounts I had grown accustomed to. We pieced together a mixture of new and used equipment, took advantage of lab startup promotional deals, and ultimately assembled a fully functional molecular biology lab on a pretty modest budget.

Taking what I learned from setting up my first biotech lab, I know I can do better. How much better? I think it should be possible to assemble a functional molecular biology lab for under $1,000. But wait you say- that is just enough to buy a decent set of pipetters- how could you set up an entire lab for that?

Precisely. That is the heart of the challenge. To create a budget-minded biotech that is functional, but doesn’t cost an arm and a leg. As I wrote up in a previous article, “biotech shouldn’t be so dang expensive!”

I think it all depends on how you define the core functionality. To me, the minimum functionality needed is to clone genes and express proteins. I am focusing on the steps from source DNA to expressed recombinant protein. So basically from PCR through cloning in E.coli, to expression of proteins.

Things I am not including in the $1,000: Analytical (in my case HPLC or LCMS), basic infrastructure like tables, stools, computer, etc., and little things like surge protectors or extension cords. And I may take the liberty of culturing my own competent cells to cut down on that cost. Vector backbone will be an open-source design to get around IP conflicts and keep things cheap. We’ll see how far we can stretch $1,000 and go from there.

I am looking mainly at functional but well-loved equipment on ebay and craigslist, and even some homemade or hacked projects capable of carrying out the job at hand. EBay has some amazing deals. So does Amazon (I usually avoid Thermo subsidiaries as much as I avoid Wally World!). And if you are willing to do some soldering, coding, and 3D printing, you can make just about anything in the lab. I acknowledge that reliability will undoubtedly be less than brand new equipment still on warranty, but of the three-legged stool of quality, cost, and time- this exercise is focused primarily on cost.

Here is my initial list of equipment, projected cost, and notes on procurement. Let me know what you think, where you think I can cut the cost down, or if there are any glaring errors in my choices or logic. I plan to revise and post updates to my budget biotech quest, so hopefully this is only the beginning!

-BZ

EQUIPMENT
Item Cost Notes
pcr – thermal cycler $200.00 used… Ebay. Or ghetto fab water bath and servo setup?
gel rig $53.00 kit from iorodeo.com
light box $80.00 mini kit from iorodeo.com or build myself
pipetters $100.00 2 pipettes at 50 each. P20 and P200 to start
water baths $12.99 crock pots with arduino thermostat (DS18B20 and SSR)
-20C freezer / fridge $50.00 total budget – cheap chest – or used on CL
incubator $50.00 Cooler/chest freezer with hairdryer/heatgun heater and extra fan? Or foam insulation box.
autoclave $83.99 pressure cooker- presto on amazon. Ikea?
centrifuge $80.00 used Brinkman on Ebay
flame for plate work $60.00 Ebay flame/regulator kit
Micro scale $25.00 amazon
microwave? $20.00 craigslist
gel power supply $15.00 homebuilt (budget molecular biology power supply)
rotary shaker $140.00 used old NewBrunswick on ebay
pH meter $20.00 Amazon or Ebay
TOTAL EQUIPMENT: $989.98
CONSUMABLES
Item Cost Notes
tips $10.00 Ebay- bulk tips – need upfront tip box
weigh boats $10.00 or papers
DNA stain $68.00 SYBR Safe – cheaper alternatives with blue LED illuminator?
gel buffer TAE homemade
DNA polymerase $39.00 mastermind from geneandcell.com
dNTPs included in mastermind mix
DNA buffer TAE homemade
gel extraction kit NA45 paper? Simple protocol? Kit…
1kb ladder $89.00 geneandcell.com
load dye bromophenol blue
comp cells homemade – but lack of -80 will affect competency
Total Consumables: $216.00
Total Combined: $1,205.98 over budget already! And chemicals not even included yet!

Why Zippypickle?

People have asked me, what’s behind the name Zippypickle? Well, my name is Brandon Zipp, and my friends just call me Zipp. During my freshman year in high school we were at track practice, and I still remember the interaction well. While standing in line waiting to do the long jump, a classmate that I didn’t know asked my name. I said Zipp, and he pondered for a second. He then responded, “I’m going to call you Zippypickle.” I’m not sure where he came up with it, but it was unique and fun. When it came time to register for my first hotmail email address, I tried a few combinations with Brandon and Zipp, but the basic configurations were already taken. So I tried Zippypickle, and poof- it has been my go-to nickname/username since then.

At one point I thought I would start a brewery or a business called Zippypickle, and even sketched out a logo for it. What could be more fitting than a cowboy riding a bucking pickle?

Zippypickle Cowboy

I recall someone saying that a cowboy riding a pickle would be too phallic. Hence the molecule as the logo for the Zippypickle blog…

-BZ

Zippypickle Mini Molecule